Shoulder antenna adaptor for the A 10 antenna of the SER 20 ENG transceiver. Increased ranges in crowds.
A 1031-U
Article-No. 004645
Passive omni-directional antenna. Transmitting and receiving antenna for frequencies between 450and 960 MHz.
GZP 10
Article-No. 003193
Mounting plate for antenna with 3/8" thread. Antenna can be attached directly or via GZG 1029.
A 9
Article-No. 070751
Transmitting/receiving antenna for SER 20. Technical data on request.
A 10
Article-No. 070749
Transmitting/receiving antenna for SER 20. Technical data on request.
GZG 1029
Article-No. 003226
Swivel joint for attachment to GZP 10 mounting plate. The swivel joint permits the exact positioning of antenna with 3/8" thread.
A 12 AD UHF
Article-No. 004156
Active directional antenna.
Frequency range: 450-960 MHz
Apex angle: approx. 100°
Front-to-back ratio: ≥ 14 dB
Gain: approx. 10 dB
A 2003-UHF
Article-No. 003658
Passive directional antenna. Transmitting and receiving antenna.
Frequency range: 450-960 MHz
Apex angle: approx. 100°
Front-to-back ratio: ≥ 14 dB
Gain: approx. 10 dB
GZA 1036-9
Article-No. 002332
Ground plane receiving antenna. For frequency tuning, the antenna rods can be cut to length.
Design principle passive ground plain antenna
Function receiving antenna
Frequency Range 140-960 MHz
Bandwidth approx. fm ± 10 %
Frequency adjustment antenna rods can be cut to length
Impedance 50 Ω
RF connection N-type connector, male
Mounting connection 3/8" thread
Length frequency-dependent
Weight approx. 250 g
GZA 1036-TV
Article-No. 002243
Ground plane receiving antenna. Frequency tuning by adjusting the length of the antenna rods.
Technical Data GZA 1036-TV
Design principle passive ground plain antenna
Function receiving antenna
Frequency Range 470-800 MHz
Bandwidth approx. fm ± 10 %
Frequency adjustment telescopic
Impedance 50 Ω
RF connection N-type connector, male
Mounting connection 3/8" thread
Length 270.5 x 254 mm
Weight approx. 340 g
AB 1036-9 AB 1036-UHF
Article-No. 003229 Article-No. 003598
Antenna booster for compensating for cable/splitter losses. N-type connectors. Attachment via 3/8" thread. Power supply via antenna cable or externally via special socket.
Passive antenna splitter 2 x 1 : 2 (ASP 212) or passive antenna splitter 1 x 1 : 3 (ASP 113) and passive antenna splitter 1 x 1 : 4 (ASP 114). DC-coupled for use with antenna boosters. Special version with powering also available for using A 12 antennas with EM 3031/32 receivers.
Frequency range 30-950 MHz
Max. current 0.3 A DC
Attenuation approx.
4 dB (ASP 212)
approx. 6 dB (ASP 113)
approx. 8 dB (ASP 114)
RF connector BNC socket
ASA 3000
Article-No. 009423
Active antenna splitter 2 x 1 : 8. Wideband 470-870 MHz. By using a pair of the optional IM 3000 selective RF filter modules, the frequency range can be reduced to the range of the wanted frequencies. With DC supply for powering optional head amplifiers.
