General Description
The super-cardioid MKH 8050 will give higher attenuation of off-axis sound from the side than its cardioid sister model.  It is a good choice for recording soloists, where the requirements for lateral acoustic separation are higher.
Features
	super-cardioid pick-up pattern
	modular design
	wide frequency response 30 to 50.000 Hz
	symmetrical transducer with 2 backplates providing extremly low distortion
	extremly low inherent self-noise
	accurate directional pattern
	non reflective Nextel coating
	provides optimum separation of instrumentss
Delivery Includes
	Microphone head MKHC 8050
	XLR module MZX 8000
	Microphone clip MZQ 8000
	Windshield MZW 8000
	User manual
	Aluminium transport caser

Technical Data

Polar pattern Frequency response

Glossary

Glossary
 

Recommended Accessories
	Description	Product	Article No.
	Extension tube 15 cm	MZE 8015	502315
	Special bar that carries the audio signal. The microphone head is attached tothe front the XLR module to the end. Length 15 cm.
	Extension tube 60 cm	MZE 8060	502316
	Special bar that carries the audio signal. The microphone head is attached to the front the XLR module to the end. Length 60 cm.
	Extension tube 120 cm	MZE 8120	502317
	Special bar that carries the audio signal. The microphone head is attached to the front the XLR module to the end. Length 120 cm.
	Bar connector mono	MZGE 8000	502324
	Joins vertical bars with one extension tube.
	Bar connector stereo	MZGE 8002	502325
	Joins vertical bars with two extension tubes.
	Vertical bar 60 cm	MZEF 8060	502318
	length 60 cm, standard 3/8" thread.
	Vertical bar 120 cm	MZEF 8120	502319
	length 120 cm, standard 3/8" thread (microphone not included).
	Table stand	MZT 8000	502331
	Classic metal table stand, sturdy and robust(microphone not included).
	Table stand	MZT 8001	502332
	Elegant table stand with acrylic base (microphone not included).
	Shock mount	MZS 8000	502330
	Flexible suspension in a very compact design; effectively suppresses the transmission of structure-borne noise
	Mini clip	MZQ 8001	502329
	Miniature clamp, ideal if the microphone is used with a remote cable; 3/8” standard thread (microphone not included).
	Microphone clip	MZQ 8000	502328
	Standard clip, included in the delivery of the MKH 8000 microphones.
	Swivel joint	MZG 8000	502323
	Designed for desktop mounting in conjunction with the MZS 31 elastic suspension; carries the audio signal and provides the connector for the XLR module.
	Remote cable 3 m	MZL 8003	502326
	Connects between the microphone head and the XLR module to make the microphone extremely unobtrusive (ideal for almost invisible use hanging from the ceiling); length: 3 m
	Remote cable 10 m	MZL 8010	502327
	Connects between the microphone head and the XLR module to make the microphone extremely unobtrusive (ideal for almost invisible use hanging from the ceiling); length: 10 m
	Windshield	MZW 8000	502333
	Double-layer design for efficient reduction of wind and pop noise (microphone not included).
	Ceiling mount	MZH 8000	...
	With cable guide. Adjustable for optimum alignment of the microphone with the sound source (microphone not included).
	Floor stand	MZFS 8000	502322
	Heavy design, insensitive to structure-borne noise.

Variant
	Product	Article No.

Review this product

Type of review *	Please select ... Personal Published
Name of publisher *
Comments on product *
Link (if published)
Contact name *
Email *
Rating *	1/10 2/10 3/10 4/10 5/10 6/10 7/10 8/10 9/10 10/10

	Please tick this box to agree for your content to be published. Please note, we may not publish all reviews sent to us.