General Description
The EM 1046 RI RF input module selects and amplifies the antenna signals. Two N-type sockets ensure reliable connection of the antennas. In systems with the large mainframe, the selective RF input module EM 1046 RI processes the incoming antenna signals. In multi-mainframe systems, the antenna splitter modules described below are connected upstream. Two different hardware versions of the EM 1046 RI are available one for the UHF band and one for the VHF band. Within the bands, the module is set at the factory to a bandwidth of 24 MHz for the UHF range (7 MHz in the VHF band). The signals within the band are amplified by a typical 14 dB and distributed to the receiver modules via the bus system. The high selectivity and large-signal strength of the RF input module is matched for use in multi-channel systems. The two diversity antenna are connected via N sockets. A supply voltage can be added for antenna boosters or active antenna.

Technical Data

Glossary

Glossary
 

Recommended Accessories
	Description	Product	Article No.

Variant
	Product	Article No.

Review this product

Type of review *	Please select ... Personal Published
Name of publisher *
Comments on product *
Link (if published)
Contact name *
Email *
Rating *	1/10 2/10 3/10 4/10 5/10 6/10 7/10 8/10 9/10 10/10

	Please tick this box to agree for your content to be published. Please note, we may not publish all reviews sent to us.