General Description
The MD 441 U is a microphone of exceptional quality: its acoustic properties come as close as possible to those of a condenser microphone. Accurate signal response and low distortion are ensured, even with the highest sound pressure levels. Surface: all metal body with black leatherette finish, sound inlet basket: nickel plated.
Features
	Excellent feedback rejection
	Excellent sound quality
	Spring capsule mounting provides low sensitivity to handling noise
	Hum compensating coil
	Five position bass roll-off switch
	Brilliance (treble boost) switch
	Integral pop filter
Delivery Includes
	1 MD 441 U
	1 microphone clamp MZA 441

Technical Data

Polar pattern Frequency response

Profile

Super-cardioid studio microphone, hum compensating coil, five position bass control, brilliance switch, integral pop filter, frequency response 30 - 20,000 Hz, sensitivity (free field, no load) 1.8 mV/Pa ± 2 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating impedance 1 kOhm, dimensions 270 x 33 x 36 mm, weight approx. 450 g.

Glossary

Glossary
 

Recommended Accessories
	Description	Product	Article No.
	Table stand	MZT 100	01883
	Solid, metal table stand with soft rubberised surround for good suppression of structure-borne noise. Provides excellent stability. 3/8” thread for mounting microphones and other equipment. Colour: black.
	Mounting bolt	MZT 14	01895
	Mounting bolt used for mounting goosenecks and shock mounts with 3/8” internal threads to table tops with a max. thickness of 23 mm. The MZT 14 has a 4.5 mm cable feed hole.

Variant
	Product	Article No.

Review this product

Type of review *	Please select ... Personal Published
Name of publisher *
Comments on product *
Link (if published)
Contact name *
Email *
Rating *	1/10 2/10 3/10 4/10 5/10 6/10 7/10 8/10 9/10 10/10

	Please tick this box to agree for your content to be published. Please note, we may not publish all reviews sent to us.