| Recommended Accessories |
 |
Description |
Product |
Article No. |
 | Receiver module | EM 1046 RX-L | 03246 |
| Receiver module, frequency range 450 - 790 MHz |
|
| Receiver module | EM 1046 RX-H | 03247 |
| Receiver module, frequency range 760 - 960 MHz MHz |
|
| Output modul | EM 1046 AO-X | 03249 |
| The EM 1046 AO-X output module is the interface to the subsequent audio equipment. In systems with several mainframes, the channels of any mainframe can be monitored individually via the monitor bus. |
|
| Balancing card | EM 1046 AO-Z | 03597 |
| By using the EM 1046 AO-Z balancing card, the 25-pin sub-D AF output of the AO-X output module becomes a fully functional, transformer balanced second output. |
|
| Antenna splitter | EM 1046 ASP 212 | 04341 |
| The three EM 1046 ASP antenna splitter modules serve to supply several mainframes with the signals of only two antenna. With an EM 1046 ASP 212, a 16-channel system can be operated with only one pair of antenna. |
|
| Blanking plate | EM 1046 CC-10 | 03516 |
| The EM 1046 CC 10 closes off unused spaces at the front of the EM 1046 MF and EM 203 MF mainframes. |
|
| Blanking plate | EM 1046 CC-12 | 03517 |
| The EM 1046 CC 12 is used for closing off spaces at the rear
of the EM 1046 MF. |
|
| Chassis interface | EM 1046 CI | 03469 |
| The chassis interface is used for connecting several mainframes to the Mikroport computer display. |
|
| Display interface | EM 1046 DI | 03470 |
| The EM 1046 DI display interface is required for the connection of display computers to the system. The display interface is supplied complete with the Mikroport Computer Display software for IBM-compatible computers. |
|
| Fan assembly | EM 1046 FA | 03875 |
| The EM 1046 FA fan assembly can be installed in the base of the EM 1046 MF mainframe when the system is to be mounted in a 19” rack. |
|
| Line interface | EM 1046 LI | 03248 |
| The EM 1046 LI line interface is used for connecting the data bus of the last EM 1046 MF. Via a subsequent display interface, up to four display computers can be connected to the EM 1046 LI. |
|
| Mainframe | EM 1046 MF | 09352 |
| The EM 1046 MF is a large mainframe for housing up
to 8 receiver modules. |
|
| Mainframe | EM 203 MF | 03692 |
| The EM 203 MF mainframe is used for smaller 5000 series receiver systems. |
|
| Power supply | EM 20-NT | 03699 |
| Power supply for the EM 203 MF |
|
| Power supply | EM 1046 SA | 03250 |
| The EM 1046 SA mains power supply module can be used with any voltage between 90–230 V AC. Complies with the limiting values stipulated in VDE 0871, curve b. |
|
| RF input module | EM 1046 RI | 03244 |
| The EM 1046 RI RF input module selects and amplifies the antenna signals. Two N-type sockets ensure reliable connection of the antennæ. |
|
| Antenna | GZA 1036 TV | 02243 |
| Ground plane receiving antenna. |
|
| Antenna | A 1031-U | 04645 |
| Passive omni-directional antenna. |
|
| Antenna | A 2003-UHF | 03658 |
| Passive directional antenna. |
|
| Antenna | A 12 AD UHF | 04156 |
| Active directional antenna. |
|
| Booster | AB 1036-UHF | 03598 |
| Antenna Booster, 8 - 36 MHz bandwidth, 10 dB gain |
|
