General Description
The MKH 800 condenser microphone is the first microphone to fully utilise the wider frequency response and dynamic range of the new high bitrate standard of advanced digital recording systems (for example SACD). Featuring five switchable pick-up patterns, the MKH 800 is a superior microphone for any recording application, offering high clarity and the absolute minimum colouration.
Features
	Extended frequency response up to 50 kHz
	Wide, flat frequency response
	Exceptionally low inherent self-noise, wide dynamic range
	Switchable pre-attenuation, switchable roll-off filter and switchable treble emphasis
	Transformerless and fully floating balanced output
	LED for on-axis alignment
	Anodised light metal body
Delivery Includes
	1 MKH 800 P 48, 1 MZS 80 shock mount,
	1 MZW 80 windshield

Technical Data

Polar pattern Polar pattern Polar pattern Polar pattern Polar pattern Frequency response Frequency response Frequency response Frequency response Frequency response

Profile

Studio microphone with 5 switchable pick-up patterns (omni-directional, wide cardioid, cardioid, super-cardioid, figure-of-eight), switchable pre-attenuation, switchable roll-off filter and switchable treble emphasis. Frequency response 30 - 50,000 Hz, sensitivity (free field, no load) 40 mV/Pa ± 1 dB at 1 kHz, nominal impedance 150 Ohm, min. terminating impedance 2 kOhm, equivalent noise level A-weighted 10 dB, CCIR-weighted 20 dB, max. sound pressure level 136 (142) dB at 1 kHz, phantom powering 48 ± 4 V, supply current 3 mA, dimensions Ø 26.7 x 176 mm, weight 135 g. Values in parentheses with attenuator switched on (6/12 dB).

Glossary

Glossary
 

Recommended Accessories
	Description	Product	Article No.
	Battery power supply unit	MZA 14 P 48 U	02960
	The MZA 14 P 48 U is designed to supply phantom-powered condenser microphones. A voltage transformer increases the voltage of a 9 V IEC 6 LF 22 (PP3 size) battery to 48 V (phantom powering). The unit is fitted with XLR connectors. Operating time approx. 25 hours.
	Foam windshield	MZW 80-ANT	03780
	This foam windshield made from open-cell foam offers maximum protection against wind and pop noise. It is suitable for the MKH 80 and the MKH 800.
	Shock mount	MZS 80	03685
	Double-swivel shock mount with 3/8”, 5/8”, and 1/2” thread insert for MKH 80, MKH 800 and MKH 30.
	Popshield	MZP 40	03132
	Popshield for close vocal applications, suitable for all microphones. Can be attached to microphone stands. Length of gooseneck: approx. 240 mm. Diameter of popshield: approx. 130 mm.

Variant
	Product	Article No.